Powershell

Tips and Tricks

Modify Prompt

Based on this

Open Powershell and type

notepad $profile

If the file does not exist you will be asked to create it, then paste the following

function prompt {
  $p = Split-Path -leaf -path (Get-Location)
  "$p > "
}

You can replace the $p > part with anything you'd like to be displayed in your shell

Alternatively, if you would like to see the full path, and the command on the next line you can use

function prompt {
  $p = Get-Location
  "$p
>"
}

Adding Aliases

Based on this

We can add persistent aliases in our profile by defining functions for them, we can open our Powershell Profile

notepad $profile

Then we can define a function to navigate to our Repo directory by adding the following to the profile

function repo {
  set-location c:\Users\NabeelValley\Documents\DevEx\Repos
}

View File Tree

You can view the folder and file tree in powershell using the tree command.

To view the Folders only in the current directory:

tree

Which will output something like:

C:.
└───main

Or from another directory you can use:

tree ./path/to/dir

To refer to the current directory you can use tree without any directory, or tree . to refer to the current directory. Both ways are almost identical in terms of the output. Note that including the directory in the command results in the full directory path being written in the command's output

And to view the tree with files included, you can use:

tree /f

Which will output something like:

C:.
└───main
        data.txt

And for another directory:

tree ./path/to/dir /f

Symlinks

Support for mklink only exists on newer versions of Windows, otherwise you may need to use New-Item

Creating symlinks can be done with the mklink command which is an alias for the New-Item -ItemType SymbolicLink command

Using the base New-Item version, a symlink can be created with the below command where data.txt is the linked file we want to create and `./main/data.txt/ is the path to the existing file:

New-Item -ItemType SymbolicLink -Name data.txt -Target ./main/data.txt

Which creates a file called data.txt which is linked to ./main/data.txt

The mklink version of this is:

mklink data.txt ./main/data.txt

For more info see [this page](https://superuser.com/questions/1307360/how-do-you-create-a-new-symlink-in-windows-10-using-powershell-not-mklink-exe_

Git Status for Sub-Directories

Check which folders have modified files (only goes one level deep)

$notGit = "`nNot Git Repositories"
Get-ChildItem -Directory | ForEach-Object {
	Set-Location $($_.Name);
	$status = (git status) 2>&1
	if ($status -like "*fatal*") {
		$notGit += "`n-$($_.Name)"
	}
 	else {
		Write-Host "$($_.Name)" -ForegroundColor yellow;
	}
	if ($status -like "*nothing to commit*") {
		Write-Host "  All Good" -ForegroundColor green;
	}
	if ($status -like "*Changes to be committed*") {
		Write-Host "  Uncomitted Files" -ForegroundColor DarkRed;
	}
	if ($status -like "*modified*") {
		Write-Host "  Modified Files" -ForegroundColor DarkMagenta;
	}
	if ($status -like "*Untracked*") {
		Write-Host "  Untracked Files" -ForegroundColor Red;
	}
	if ($status -like "*pull*") {
		Write-Host "  Behind Origin" -ForegroundColor DarkGreen;
	}
	Set-Location ..
}

Write-Host $notGit;

Zip and Unzip a File

Compress-Archive .\DirectoryToZip .\NewFileName.zip
Expand-Archive .\FileToUnzip.zip .\DestinationDirectoryName

Copy and Paste Files

Copy the current directory with:

Get-ChildItem * | Set-Clipboard

Copy a single file with:

Get-Item '.\FileToCopy.png' | Set-Clipboard

Paste Item with:

Get-Clipboard -Format FileDropList | Copy-Item

Send an Email

From this StackOverflow Answer

Function Send-EMail {
    Param (
        [Parameter(`
            Mandatory=$true)]
        [String]$EmailTo,
        [Parameter(`
            Mandatory=$true)]
        [String]$Subject,
        [Parameter(`
            Mandatory=$true)]
        [String]$Body,
        [Parameter(`
            Mandatory=$true)]
        [String]$EmailFrom="myself@gmail.com",  #This gives a default value to the $EmailFrom command
        [Parameter(`
            mandatory=$false)]
        [String]$attachment,
        [Parameter(`
            mandatory=$true)]
        [String]$Password
    )

        $SMTPServer = "smtp.gmail.com"
        $SMTPMessage = New-Object System.Net.Mail.MailMessage($EmailFrom,$EmailTo,$Subject,$Body)
        if ($attachment -ne $null) {
            $SMTPattachment = New-Object System.Net.Mail.Attachment($attachment)
            $SMTPMessage.Attachments.Add($SMTPattachment)
        }
        $SMTPClient = New-Object Net.Mail.SmtpClient($SmtpServer, 587)
        $SMTPClient.EnableSsl = $true
        $SMTPClient.Credentials = New-Object System.Net.NetworkCredential($EmailFrom.Split("@")[0], $Password);
        $SMTPClient.Send($SMTPMessage)
        Remove-Variable -Name SMTPClient
        Remove-Variable -Name Password

}

Troubleshooting Path Commands

If a command is not running the application/version of the application you'd expect you can try the following steps:

1. Refresh your path and try the command again, it may just not be up-to-date. You can use the following function to do that:

function refresh {
  $env:Path = [System.Environment]::GetEnvironmentVariable("Path","Machine") + ";" + [System.Environment]::GetEnvironmentVariable("Path","User")
}

2. If you command is just generally being weird in some way it may be because it is defined/part of another path than the one you expect

To see where a command is being run from, you can try the following:

Get-Command <command>

e.g. for node:

Get-Command node

e.g my node command was being problematic because it was running the one in my Anaconda path entry (because apparently Anaconda comes with Node)

3. In order to ensure that the correct application/command takes precedence move it higher up your path

Create Drive Aliases

On Windows you can alias specific folders as virtual drives (for easy reference or to get around file length restrictions)

To view your aliases/drives you can run:

> subst
R:\: => C:\repos

To create a new drive you can use:

> subst X: C:\path\to\folder

Where X is the drive you would like to map to. Be sure not to have the trailing \ in your folder name

The path to the folder can also be relative: .\my\rel\path

To remove a drive run the following command:

> subst R: /D

What Process is Using a Port

To view what process is using a specific port you can run the following command:

Get-Process -Id (Get-NetTCPConnection -LocalPort 5000).OwningProcess

Zipping Files

To zip all the files in a directory you can use the following:

Compress-Archive -Path ./* -DestinationPath ./output_file.zip

To zip a directory, including the root directory in the Zip use the following:

Compress-Archive -Path ./dir_to_zip -DestinationPath Compress-Archive -Path ./* -DestinationPath ./output_file.zip

Search for Devices on Network

To view the IP's of the different devices that are currently connected to your network you can use the following command:

arp -a

Connect to RDP

To use an RDP file you can make use of the mstsc command with a path to the RDP file you want to connec with:

mstsc ./my-cool-server.rdp

Which will then open the RDP file

Switch to Home Directory

You can switch to your home directory on Powershell with cd ~, the ~ directory represents the user's home, same as in other OS's and shells

My Current $PROFILE

Yout Powershell is a script that runs whenever you open a new powershell instance, the functions available in it become part of your session so you can just call them from the terminal. The path to this file is stored in every Powershell instance as the $PROFILE variable

To open your $PROFILE in notepad you can run:

notepad $PROFILE

My current profile which has some common commands is here:

# POWERSHELL CONFIGURATION FUNCTIONS
# ==================================
# THESE ARE CALLED BY POWERSHELL ITSELF

# SETS CUSTOM PROMPT, THIS FUNCTION GETS CALLED ON PS SETUP
function prompt {
  $p = Get-Location
  "$p
!"
}

# ENVIRONMENT FUNCTIONS
# =====================
# CONFIGURE ENVIRONMENT

# REFRESH SESSION ENVIRONMENT VARIABLES
function _refresh {
  $env:Path = [System.Environment]::GetEnvironmentVariable("Path","Machine") + ";" + [System.Environment]::GetEnvironmentVariable("Path","User")
}

# GENERAL UTILITIES
# =================

# NAVIGATION
# ^^^^^^^^^^

# CD TO MY REPOSITORIES
function _repo {
  Set-Location c:\repos
}

# CD TO MY DOCS
function _docs {
  Set-Location C:\repos\PersonalSite\static\content\docs
}

# GIT
# ^^^

# MERGE GIT "DEVELOP" TO "MASTER"
function _quickmerge {
  git push
  git checkout master
  git merge develop
  git push
  git checkout develop
}

# COMMIT ALL SUBMODULE'S FILES AND RUN SAME COMMIT ON PARENT REPO
# FOR THE UPDATED SUBMODULE. RUN FROM SUBMODULE DIRECOTRY
function _updatesub  {
  param(
    [string]$commitMessage
  )

  $submoduleFolder = Split-Path (Get-Location) -Leaf

  git add .
  git commit -m $commitMessage
  git push
  cd ..
  git add $submoduleFolder
  git commit -m $commitMessage
  git push
  cd $submoduleFolder
}

# FILE MANIPULATION
# ^^^^^^^^^^^^^^^^^

# COPY SOMETHING TO YOUR CLIPBOARD
function _copy {
  param(
    [string]$fileToCopy
  )

  Get-Item $fileToCopy | Set-Clipboard
}

# PASTE WHAT'S ON YOUR CLIPBOARD
function _paste {
  Get-Clipboard -Format FileDropList | Copy-Item
}

# RENAME A FILE
function _rename {
  param(
    [string]$currentFile,
    [string]$newName
  )

  Rename-Item -Path $currentFile $newName
}

# COPY AND RENAME FILE
function _dupe {
   param(
    [string]$currentFile,
    [string]$newName
  )
  $tempDir = ".temp_nvdupe"

  nvcopy $currentFile
  mkdir $tempDir
  cd $tempDir
  nvpaste
  nvrename $currentFile $newName
  nvcopy $newName
  cd ..
  nvpaste
  rm -r $tempDir
}