LEDs

General information on using LEDs in electric circuits

LED is short for Light Emitting Diode

Symbol

LED's are represented with the Diode symbol with 2 arrows added:

Connecting

When connecting an LED in a circuit it must be connected:

1. in series with a resistor
2. in the correct direction

Below is an example circuit:

Series Resistor

The resistor to be connected with a specific LED can be calculated by:

$R_{LED} = \frac{V_{source} - V_{LED}}{I_{LED}}$

Where:

• $V_{source}$ is the voltage over the LED and Resistor
• $V_{LED}$ is the LED's required voltage
• $I_{LED}$ is the current required across the LED

Direction

The direction that an LED is connected in is very important, both for functioning purposes as well as to ensure the LED is not damaged.

Below is a diagram showing the direction for LED connection, from Starting Electronics